Wii PS3 XBOX 360 PS2 Playstation XBOX
 
 
 
 
Product Category
 
 
 
 
 
 
 
Installation Diagrams
 
 
 
 
Customer Support
 
 
 
 
 
Best Selling Items

Nintendo Wii Drive Key Modchip- Order Modchips at Mod-chip.net
Drive Key Modchip
Open your Wii, plug the chip in between two flex cables and put your Wii back together. There is no soldering required.

    DUO 3 Ultra Modchip Installation

Please use "Right Click" and "Save as" (each diagram is around 500k.)

If there are any mistakes in the diagrams. Please email us and let us know. Thank you.

v1/v2 (010 bios)
GH004 010 gap bios
GH004 010 no gap bios
GH005 010 no gap bios

v1/v2/v3 (020 bios)
GH004 020 no gap bios
GH005 020 no gap bios
GH006 020 no gap bios
GH006 020 gap bios
(looks exactly the same as theGH007 020 gap bios.)
GH007 020 gap bios

v4 (030/040 bios)
v4 gap bios
v4 no gap bios

v5/v6
v5/v6 board

v7/v8
v7/v8 board

v9
v9 board

v10
v10 board

 

v12
v12 board

v13
v13 board

v14 - v16
(your board will look like deviation of the following)

v14 - v16 type1
v14 - v16 type2
v14 - v16 type3
v14 - v16 type4

(v14 - v16, 7500x and 7700x boards are all very similar, please check al diagrams. Thank you.)

7700X

type1
type2
type3

7900X

type1

9000x   (thanks to Mr. Zeeeee)

type 1

 


The Duo 3 Ultra Chip has 3 boot modes.

Fully Auto detect PS2, PSX and movie mode

Disable Mode

- Hold  the START  button on joypad 1 until "DISABLED" appears on the TV.
- press RESET button and the chip will remain in disable mode until the PS2 is power down again.

Boot from memory card

- From reset, hold R1 button on joypad 1 to boot installed application on memory card. (mc:BOOT/BOOT.ELF)

A lot of people have asked us how to installed useful programs to the memory card. We found the following site quite useful. Hopefully, the sites owner doesn't mind us linking to it.

http://www.geocities.com/zebradudeman/

Boot from HHD (old machines)

- From reset, hold R2 button on joypad 1 to boot installed application on HDD.